Корзина 0
Список сравнения 0 Список желаний 0
Личный кабинет
Меню
Наш адрес: г. Екатеринбург, ул. Восстания, д. 56, корп. 2
e-mail: info@ruslion.ru
г. Екатеринбург, ул. Восстания, д. 56, корп. 2
e-mail: info@ruslion.ru
+7(343)243-57-05 Заказать звонок
29 559 р.

Адаптер HP FlexFabric 10Gb 2P 536FLB FIO Adptr 766491-B21

Производитель: Hewlett Packard
Код Товара: 91472-83
Уточняйте наличие
29 559 р.
Купить в один клик
Адаптер HP FlexFabric 10Gb 2P 536FLB FIO Adptr 766491-B21
Технические характеристики:
Models
HP FlexFabric 10Gb 2-port 536FLB Adapter
766490-B21
HP FlexFabric 10Gb 2-port 536FLB FIO Adapter
766491-B21
HP ProLiant server support
HP ProLiant BL460c Gen9
Supported interconnect modules
HP FlexFabric 10Gb/24-port Module
HP Virtual Connect Flex-10/10D Module for BladeSystem c-Class
HP 6120XG Blade Switch
HP 6120G/XG Blade Switch
HP 6215XLG Blade Switch
HP 1:10Gb Ethernet BL-c Switch
Cisco Catalyst 3120G Blade Switch for HP
Cisco Catalyst 3120X Blade Switch for HP
Cisco Catalyst 3020 Blade Switch
Cisco Fabric Extender B22HP for HP
HP GbE2c Layer 2/3 Ethernet Blade Switch
HP 10GbE Pass-Thru Module
HP 1GbE Pass Thru Module
Key features
Full hardware offload of iSCSI and FCoE storage protocol processing for highest performance converged Ethernet data and storage networks.
Dual-port 10GbE Flex-10 FlexibleLOM network adapter that provides the flexibility to choose the type of LOM to meet growing infrastructure needs
Industry-leading throughput and latency performance
Supports HP's Flex-10 blade interconnect technology
User configurable bandwidth settings when combined with the 10Gb Flex-10 Virtual Connect module. From 100Mb/s to10Gb/s on up to four "Physical Function" NICs per port, in increments of 100Mb/s for NIC. The combined bandwidth of NICs cannot exceed port bandwidth i.e. 10 Gb.
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration and offloads for stateless TCP/IP
Improved small packet performance
Support for Preboot eXecution Environment (PXE)
Integrated PHY and MAC
Supports for SR-IOV
Supports Network Partitioning
Dual-port 10 Gigabit ethernet throughput (theoretical bandwidth)
The HP 536FLB adapter delivers 20,000 Mbps full duplex Ethernet transfer rate per port (40 Gbps aggregate full duplex), providing the network performance needed to improve response times and alleviate bottlenecks.
HP Virtual Connect FlexFabric 10Gb Ethernet Module for the c-Class BladeSystem
When paired with the HP Virtual Connect FlexFabric 10Gb Ethernet Modules, take advantage of four Flex Nics, which are PCI Physical Function devices that are OS/ Hypervisor independent.
Jumbo frames
The HP 536FLB adapter supports jumbo frames (also known as extended frames), permitting up to a 9K byte (KB) transmission unit (MTU) when running Ethernet I/O traffic.
TCP/IP Stateless offloading
TCP, IP, UDP checksum offload, Large Send Offload (LSO), TCP, Segmentation Offload (TSO). These features optimize host efficiency, leaving the CPU available for other duties.
MSI and MSI-X
Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers by load balancing interrupts between CPUs/cores
802.1p QoS tagging
IEEE quality of service (QoS) 802.1p tagging allows the adapter to mark or tag frames with a priority level across a QoS-aware network for improved traffic flow.
802.1Q VLANs
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of the HP 536FLB adapter to be separated into multiple virtual NICs for added network segmentation and enhanced security and performance. VLANs increase security by isolating traffic between users.
Optimized for virtualization
I/O Virtualization support for VMware NetQueue and Microsoft VMQ help meet the performance demands of consolidated virtual workloads.
RDMA
Not Supported
iSCSI/FCoE
The HP 536FLB does support accelerated iSCSI or iSCSI boot and FCoE.