Модуль Cisco A9K-MPA-4X10GE
278 986 р.
Модуль Cisco A9K-MPA-4X10GE
Технические характеристики
Технические характеристики
| Chassis compatibility | Compatible with the Cisco ASR 9922, 9010, 9006 and 9001 systems |
| Port density | Up to 2 modular port adapters are supported per line card.. |
| Ethernet | ? IEEE 802.3 compliant ? 10 Gigabit Ethernet PHY monitoring ? IEEE 802.x flow control ? Full-duplex operation ? Per-port byte and packet counters for policy drops; oversubscription drops; cyclic redundancy check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets |
| Card density | Maximum number of line cards per system: Cisco ASR 9922 = 20, Cisco ASR 9010 = 8, and Cisco ASR 9006 = 4 |
| Options | Each line card is available as either a Service Edge Optimized (enhanced QoS) or Packet Transport Optimized (basic QoS) line card. |
| Reliability and availability | Line card online insertion and removal (OIR) support without system impact |
| Network Equipment Building Standards (NEBS) | Cisco ASR 9000 Series Routers are designed to meet: ? SR-3580: NEBS Criteria Levels (Level 3) ? GR-1089-CORE: NEBS EMC and Safety ? GR-63-CORE: NEBS Physical Protection |
| Operating temperature (nominal) | 41 to 104?F (5 to 40?C) |
| Operating temperature (short-term)[1] | 23 to 131?F (–5 to 55?C) |
| Operating humidity (nominal) relative humidity | 10 to 85% |
| Storage temperature | –40 to 158?F (–40 to 70?C) |
| Storage relative humidity | 5 to 95% Note: Not to exceed 0.024 kg of water per kg of dry air |
| Operating altitude | –60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements) |
| ETSI standards | Cisco ASR 9000 Series Routers are designed to meet: ? EN300 386: Telecommunications Network Equipment (EMC) ? ETSI 300 019 Storage Class 1.1 ? ETSI 300 019 Transportation Class 2.3 ? ETSI 300 019 Stationary Use Class 3.1 ? EN55022: Information Technology Equipment (Emissions) ? EN55024: Information Technology Equipment (Immunity) ? EN50082-1/EN-61000-6-1: Generic Immunity Standard |
| EMC standards | Cisco ASR 9000 Series Routers are designed to meet: ? FCC Class A ? ICES 003 Class A ? AS/NZS 3548 Class A ? CISPR 22 (EN55022) Class A ? VCCI Class A ? BSMI Class A ? IEC/EN 61000-3-2: Power Line Harmonics ? IEC/EN 61000-3-3: Voltage Fluctuations and Flicker |
| Immunity | Cisco ASR 9000 Series Routers are designed to meet: ? IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air) ? IEC/EN-61000-4-3: Radiated Immunity (10V/m) ? IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal) ? IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM) ? IEC/EN-61000-4-5: Signal Ports (1kV) ? IEC/EN-61000-4-5: Surge DC Port (1kV) ? IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms) ? IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m) ? IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations |
| Safety | Cisco ASR 9000 Series Routers are designed to meet: ? UL/CSA/IEC/EN 60950-1 ? IEC/EN 60825 Laser Safety ? ACA TS001 ? AS/NZS 60950 ? FDA: Code of Federal Regulations Laser Safety |