Модуль Cisco Catalyst WS-X6516-GBIC обладает шестнадцатью портами GBIC, работающих на скорости 1GE full-duplex, в которые могут быть установлены оптические модули 1000BASE-SX, LX/LH, ZX, GBIC под медный носитель, или GBIC CWDM, в любой комбинации. Основные особенности:
Технические характеристики
- Порты: 16x 1000BASE-X (GBIC)
- Подключение к шине: Switch Fabric
- Форвардинг: Centralized (возможен апгрейд до Distributed с помошью установки дочерней карты WS-F6K-DFC)
- Очерёдность на порт: 3 transmit, 2 receive
Технические характеристики
| Ports per module | • 16 ports. Ports are numbered (left to right): – Top row, odd numbered ports 1-15. – Bottom row, even numbered ports 2-16. • 2 port groups • Port ranges per port group: 1-8, 9-16 |
| Port connector type | SC or RJ-45 depending on the type of GBIC transceiver installed in the module port |
| Cabling distance | Depends on the GBIC transceiver installed in the module port. Refer to Appendix B for descriptions of the GBIC transceiver types and supported cabling distances. |
| Speed | 1 Gbps |
| Buffer size | • 512 KB per port—WS-X6516-GBIC • 1 MB per port—WS-X6516A-GBIC |
| QoS | • Number of egress queues: 3 • Number of ingress queues: 2 • Number of thresholds per egress queue: 2 • Number of thresholds per ingress queue: 4 |
| Maximum frame size | Up to 9216 bytes per frame (both modules) |
| Module oversubscription rate | 2:1 |
| Supervisor engine support | Supported on the following supervisor engines: • Supervisor Engine 2 • Supervisor Engine 32 • Supervisor Engine 32 PISA • Supervisor Engine 720 • Supervisor Engine 720-10GE |
| Software support | • With Supervisor Engine 2—12.1(18a)E, WS-X6516-GBIC; 12.1(19)E1, WS-X6516A-GBIC • With Supervisor Engine 32—12.2(18)SXF • With Supervisor Engine 32 PISA—12.2(18)ZY • With Supervisor Engine 720—12.2(14)SX • With Supervisor Engine 720-10GE—12.2(33)SXH |
| Queues per port | Both modules: • Tx—1p2q2t • Rx—1p1q4t |
| Chassis/slot restrictions | No chassis or slot restrictions; the module can occupy any slot in any Catalyst 6500 or Catalyst 6500-E chassis. |
Bus connection | 32-Gbps shared bus |
| Module upgrades available | |
| PoE support | Not supported. |
| Distributed forwarding support | Can be field-upgraded with either the WS-F6K-DFC, WS-F6K-DFC3B, or WS-F6K-DFC3BXL daughter cards. Refer to the Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL Installation Note for additional information and field upgrade procedures. |
| Pluggable transceivers support | GBIC transceivers are supported. Refer to your software release notes to determine which GBIC transceivers are supported. See the "1-GB Transceivers" section in Appendix B for additional information on the GBIC transceivers. |
| Digital Optical Monitoring (DOM) support | Supported on some GBIC transceivers. Note Refer to your software release notes for specific information on which GBIC transceivers support DOM and the software release required for support. |
| Module front panel LEDs | STATUS • Green—All diagnostics pass; the module is operational. • Orange—The module is booting or running diagnostics; an overtemperature condition has occurred. LINK • Green—The port is active (the link is connected and operational). • Flashing orange—The port failed diagnostics and is disabled. • Orange—The port is disabled. • Red—The module is resetting; an overtemperature condition has occurred. Note If the module fails to download code and configuration information successfully during the initial reset, the LED stays red; the module does not come online. • Off—The port is not active or the link is not connected. |
16 ports. Ports are numbered (left to right):